Maintenance managers in hospitals, hotels and shopping centres deal every day with low-quality dispensers that jam, waste product or require constant maintenance. Celtex dispensers have been developed to solve these practical issues through targeted solutions that reduce mechanical problems, lower operating costs and support compliance in demanding sectors. As professional hygiene dispensers, they are built around quality, innovation and operational simplicity.
As Celtex Catalunya, we directly represent the values of quality, sustainability and technical simplicity that define this leading Italian brand in Europe.
Why choose Celtex technology
Celtex is not just another dispenser brand. With 40 years of experience in the sector, it has developed technologies designed to solve real problems identified across all kinds of facilities. Its approach focuses on mechanical simplicity, consumption control and certified sustainability.
We provide direct access to the full Celtex range, including its three most innovative families: Omnia Labor, especially suited to the food sector; Easy Pull for compact spaces; and E-Control systems for maximum hygiene.
You also benefit from specialist technical support, spare parts availability and application-specific training.
Omnia Labor range: innovation for professional kitchens and workshops
Food-contact certified paper: HACCP compliance
The Omnia Labor system has been specifically designed for sectors where direct food contact requires strict certification. Its paper is certified for the food industry, allowing both wet and dry contact without leaving residues that could contaminate food products.
This certification is essential for industrial kitchens, butcheries, bakeries and any facility where food is processed.
Omnia Labor technology removes some of the most common operational problems: twisted paper that slows work down, paper running out during service, dispenser jams and rolls that are too bulky. Its one-handed dispensing system helps optimise timing in high-productivity environments.
Consumption control: waste reduction of up to 50%
Customer tests have shown that one Omnia Labor box, at its maximum capacity of 400 sheets in the 25 x 30 cm maxi format, can halve paper consumption compared with six smart-type rolls. Combined with its efficient sheet-by-sheet dispensing system, each sheet remains protected until the moment of use.
This improvement in consumption control translates directly into operational savings and lower environmental impact, which is especially relevant for facilities pursuing sustainability targets or handling high daily volumes.
It is also a strong option for mechanical workshops and the industrial sector in general, as the Omnia Labor system offers flexible installation, including easy wall mounting or shelf placement with a dedicated support. Its compact, robust format performs well in the demanding conditions typical of industrial environments.
Easy Pull system: small, efficient and built for compact spaces
Central feed and FLUTECH® paper: dual technical innovation
Easy Pull is defined by its oval roll shape and central-feed system. Combined with vertical positioning, it uses gravity to ensure smooth paper dispensing right to the end of the roll. This dispensing method removes the operational interruptions commonly seen with more conventional dispensers.
In addition, Prime Midi toilet paper incorporates Celtex’s patented Flutech® technology, which dissolves in 9 seconds and helps address toilet blockages. This reduces emergency maintenance call-outs and avoidable servicing issues, which is especially relevant for hotels, shopping centres and offices with high user traffic.
Compact design that optimises space
For facilities where space is limited, Easy Pull offers reduced dimensions without compromising capacity. Its transparent window allows constant consumption checks without opening the dispenser, making refill planning and preventive maintenance easier.
The availability of two versions, toilet tissue and hand towel paper, makes it possible to maintain visual consistency while adapting functionality across different areas in the same facility.
Megamini E-Control system: touchless technology for maximum hygiene
E-Control technology: complete removal of physical contact
E-Control represents the most advanced evolution of the Megamini systems, providing touchless dispensing through electronic sensors activated by hand movement. These touchless hygiene dispensers eliminate cross-contamination by ensuring that the user only comes into contact with the dispensed product, not the dispenser itself.
E-Control is manufactured in Germany to high quality standards and includes calibrated proximity sensors for reliable, precise dispensing. This technology is especially valuable in operating theatres, laboratories, industrial kitchens and other critical areas where contact must be kept to an absolute minimum under HACCP protocols and health regulations.
Rechargeable battery: sustainability and outstanding autonomy
The E-Control rechargeable battery system uses lithium iron phosphate technology with no memory effect. This means it can be recharged before being fully discharged while maintaining 100% of its nominal capacity. This feature guarantees more than 2,000 charge cycles with consistent performance.
Block batteries provide up to 75,000 uses for liquid product dispensers such as foam soap and sanitising gel, while Stick batteries provide up to 25,000 uses for hand towel dispensers. This exceptional autonomy dramatically reduces maintenance interventions.
The environmental impact is significantly lower. Across the full lifecycle, E-Control rechargeable batteries avoid more than 1,600 kg of CO2 emissions and 540 kg of waste compared with conventional battery-powered systems, while also reducing disposal and maintenance costs.
Controlled dispensing and consumption optimisation
E-Control systems include a programmable delivery delay from 0.5 to 5 seconds, which helps optimise consumption and reduce operating costs in measurable terms.
For E-Control hand towel dispensers, the stub roll system ensures continuity of service without waste, while the sheet length can be adjusted from 15 to 80 cm. The 500-metre E-Control rolls provide up to 2,500 services with optimised consumption.
For foam soap, each use dispenses a final 0.8 ml dose through two consecutive 0.4 ml outputs, considered the ideal dose for handwashing according to effectiveness studies. The 700 to 800 ml cartridges provide up to 1,000 washes, helping optimise the cost-per-service ratio.
E-Control systems by application
E-Control hand towel dispenser: incorporates a microchip-protected system that only works with original rolls. When the roll is finished, the microchip deactivates, and the dispenser can only be reactivated by installing a new roll with a functioning chip.
E-Control foam soap: available in HY Foam, scented with lemon and enriched with vegetable glycerine, offering 875 doses and EU Ecolabel certification, and Microbar Foam, with antimicrobial thyme and rosemary action, offering 1,000 doses and suitability for HACCP environments.
E-Control sanitising gel: a 70% alcohol-based formula with vegetable gelling agents derived from cellulose and natural ethanol from European non-GMO beet and wheat. Enriched with lemon essential oil, it is skin-friendly and environmentally conscious, as it is formulated without chlorine derivatives.
E-Control toilet seat cleaner: designed for surfaces and toilet seats, it helps prevent cross-contamination with a 70% alcohol-based formula enriched with Ceylon cinnamon extracts and lemon essential oil. It remains skin-friendly in case of accidental contact.
The Megamini E-Control family brings together Made in Italy design, German technology and certified sustainability, delivering touchless solutions that remove cross-contamination while optimising consumption and reducing environmental impact in a verifiable way.
Megamini Formatic: the efficient manual alternative
For facilities that want to control costs without giving up professional functionality, the Megamini Formatic system, compatible with HY Foam and Microbar Pro soaps, offers controlled manual dispensing that optimises consumption while maintaining high hygiene standards. It is particularly suitable for medium-traffic areas where investment in touchless technology is not operationally justified.
The Formatic foam soap dispenser delivers a controlled 0.4 ml dose per press, allowing up to 2,250 hand washes from a 900 ml cartridge. This precise dosing helps optimise consumption and reduce the waste typically associated with basic dispensers.
Formatic cartridges have been redesigned using approximately 40% less plastic, reducing environmental footprint and improving the cartridge’s self-collapsing capacity as the product is used. This also makes visual consumption checks easier through the dispenser’s semi-transparent window.
The removable key lock prevents unauthorised access, while the Made in Italy design keeps visual consistency with other Megamini systems, allowing practical combinations based on the needs of each area.
Environmental impact and sustainability: a certified commitment
Verified PEFC and Ecolabel certifications
Celtex maintains a verifiable commitment to sustainability through PEFC certification, which guarantees the responsible origin of forest-based raw materials. Its products also comply with European Ecolabel standards for tissue paper products.
Rechargeable battery technology in E-Control systems removes the need for thousands of disposable batteries over the dispenser’s lifetime, significantly reducing environmental impact compared with conventional systems powered by alkaline batteries.
Waste reduction through optimised technology
Controlled dispensing systems reduce waste by between 30% and 50%, depending on the application, supporting both sustainability targets and lower operating costs. This optimisation is especially relevant for facilities working towards environmental certification.
The long-life design of Celtex dispensers reduces replacement needs, while the high-quality ABS materials ensure durability under intensive use without premature deterioration.
Technical simplicity: fewer mechanical issues, greater efficiency
Celtex design philosophy prioritises mechanical simplicity over unnecessary complexity. Its dispensers include fewer moving parts, which reduces the likelihood of failure and lowers the need for specialist maintenance.
The optimised internal mechanisms remove common failure points found in conventional dispensers, such as deformed springs, misaligned sensors or cutting systems that fall out of adjustment. This technical simplicity helps reduce maintenance costs and downtime.
For maintenance teams, this also means less need for specialist training and greater ability to resolve the limited issues that may arise directly on site.
Integration into hygiene plans: hospitals, hospitality and industry
Celtex dispensers integrate effectively into HACCP hygiene plans for the food industry, hospital disinfection protocols and hospitality cleaning standards. Their consumption control and accompanying certifications help streamline audits and support compliance verification.
In hospitals, combining touchless E-Control systems for critical areas, manual Megamini systems for lower-risk zones and Omnia Labor for food processing areas makes it possible to optimise costs while maintaining hygiene standards according to the level of risk in each zone.
For hospitality environments, the available finishes, white, chrome and black, support design consistency while adapting to functional requirements in kitchens, dining areas, bedrooms and public washrooms.
In the food industry, the food-contact certification of the Omnia Labor system, combined with mechanical simplicity that reduces contamination risks caused by faults, provides the operational security needed for regulatory compliance.
Celtex quality and HeySupply expertise
As Celtex partner, we offer far more than product distribution. We provide rapid product availability, specialist technical advice to help select the right systems according to specific regulations, and staff training to optimise product use.
Our team, specialised in hygiene plans, can also carry out audits of existing facilities to identify opportunities to improve efficiency and reduce operating costs.
We directly represent the core values of Celtex: technical innovation, certified sustainability, operational simplicity and maximum reliability. We also ensure access to the latest innovations, direct technical support and strong commercial conditions.
Celtex dispensers are not simply functional products. They are technical solutions developed to solve specific problems in the professional sector. Their combination of mechanical simplicity, consumption control, certified sustainability and regulatory compliance makes them a preferred option for facilities looking to optimise operations while maintaining high quality standards.
Does your facility need to optimise consumables costs while maintaining professional hygiene standards? Contact Celtex Catalunya, as part of the wider HeySupply solution, for a tailored technical audit and see how Italian technology can improve the efficiency of your hygiene systems.